Crystal Lake Dam, Maine, USA

Quick Facts About Crystal Lake Dam

Location: Cumberland, Maine
Coordinates: 44.11128, -70.679102
River: Crystal Lake Outlet River
Primary Purpose: Recreation
Type: Concrete Stone Rockfill Earth
Commissioned: 1890
Dam Height: 14 ft (4 m)
Dam Length: 54 ft (16 m)
Dam Capacity: 5,085 acre-ft (6,272 Ml)

Crystal Lake Dam Map

Here is a map of Crystal Lake Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Crystal Lake Dam Information

Crystal Lake Dam is a concrete stone rockfill earth dam located in Cumberland County, Maine.

The dam, which is on the Crystal Lake Outlet River, was primarily built for Recreation purposes, but also serves for Fire Protection, Stock and Or Small Fish Pond benefits.

The dam was designed by and commissioned in 1890 and is currently owned by Harrison.

Crystal Lake Dam Structure

The Crystal Lake Dam is approximately 54 feet (16 m) long, 14 feet (4 m) high and has a structural volume of cubic yards (0 cubic metres).

Crystal Lake Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 3,700 acre-ft (4,564 Ml) and maximum capacity of 5,085 acre-ft (6,272 Ml).

The surface area of the reservoir is 461 acres (187 ha) and the total catchment area is 9 square miles (24 square kilometres).

Crystal Lake Dam Spillway

According to the latest available data, the Crystal Lake Dam does not have any spillways.

Crystal Lake Dam Compared to Four Famous American Dams

Crystal Lake Dam
Cumberland, Maine
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 14 730 550 357 216
Length (Ft) 54 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 5,085 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 9 167,800 74,100 3,611 108,355

Crystal Lake Dam Weather

Current Conditions at Crystal Lake Dam

Failed to fetch current weather data.

7-Day Forecast for Crystal Lake Dam

Failed to fetch weather forecast data.

Crystal Lake Dam Frequently Asked Questions

In which state is the Crystal Lake Dam?

Crystal Lake Dam is in Maine.

In which county is the Crystal Lake Dam?

Crystal Lake Dam is in Cumberland County.

How high is the Crystal Lake Dam?

Crystal Lake Dam is 14 feet high.

How long is the Crystal Lake Dam?

Crystal Lake Dam is 54 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG