Vanceboro Dam, Maine, USA

Quick Facts About Vanceboro Dam

Location: Washington, Maine
Coordinates: 45.5693, -67.4279
River: St. Croix River
Primary Purpose: Hydroelectric
Type: Concrete Earth Gravity
Commissioned: 1967
Dam Height: 21 ft (6 m)
Dam Length: 469 ft (143 m)
Dam Capacity: 214,470 acre-ft (264,544 Ml)
Hazard Potential: Significant
Condition Assessment: Satisfactory

Vanceboro Dam Map

Here is a map of Vanceboro Dam with satellite imagery. You can zoom in and out, toggle full screen mode and even enter street view directly from the map.

Vanceboro Dam Information

Vanceboro Dam is a concrete earth gravity dam located in Vanceboro, Washington, Maine.

The dam, which is on the St. Croix River, was primarily built for Hydroelectric purposes, but also serves for benefits.

The dam was designed by and commissioned in 1967 and is currently owned by Woodland Pulp, LLC.

Vanceboro Dam Structure

The Vanceboro Dam is approximately 469 feet (143 m) long, 21 feet (6 m) high and has a structural volume of cubic yards (0 cubic metres).

Vanceboro Dam Storage Capacity & Surface Area

The reservoir has a normal storage capacity of 187,100 acre-ft (230,784 Ml) and maximum capacity of 214,470 acre-ft (264,544 Ml).

The surface area of the reservoir is 18,250 acres (7,386 ha) and the total catchment area is 417 square miles (1,080 square kilometres).

Vanceboro Dam Spillway

The dam has a 45 feet (14 m) wide controlled spillway with a maximum discharge capacity of 13400 cubic feet per second (379 cubic metres per second).

Vanceboro Dam Compared to Four Famous American Dams

Vanceboro Dam
Washington, Maine
Hoover Dam
Clark County, Nevada
Grand Coulee Dam
Okanogan County, Washington
Theodore Roosevelt Dam
Maricopa County, Arizona
Glen Canyon Dam
Coconino County, Arizona
Height (ft) 21 730 550 357 216
Length (Ft) 469 1,244 5,673 6,920 1,565
Storage Volume (acre-ft) 214,470 30,237,000 9,562,000 3,540,000 29,875,000
Drainage Area (sq miles) 417 167,800 74,100 3,611 108,355

Vanceboro Dam Weather

Current Conditions at Vanceboro Dam

Failed to fetch current weather data.

7-Day Forecast for Vanceboro Dam

Failed to fetch weather forecast data.

Vanceboro Dam Frequently Asked Questions

In which state is the Vanceboro Dam?

Vanceboro Dam is in Maine.

In which county is the Vanceboro Dam?

Vanceboro Dam is in Washington County.

How high is the Vanceboro Dam?

Vanceboro Dam is 21 feet high.

How long is the Vanceboro Dam?

Vanceboro Dam is 469 feet long.

Condition Assessment Classification

Satisfactory

No existing or potential dam safety deficiencies are recognized. Acceptable performance is expected under all loading conditions (static, hydrologic, seismic) in accordance with the minimum applicable state or federal regulatory criteria or tolerable risk guidelines.

Fair

No existing dam safety deficiencies are recognized for normal operating conditions. Rare or extreme hydrologic and/or seismic events may result in a dam safety deficiency. Risk may be in the range to take further action. Note: Rare or extreme event is defined by the regulatory agency based on their minimum

Poor

A dam safety deficiency is recognized for normal operating conditions which may realistically occur. Remedial action is necessary. POOR may also be used when uncertainties exist as to critical analysis parameters which identify a potential dam safety deficiency. Investigations and studies are necessary.

Unsatisfactory

A dam safety deficiency is recognized that requires immediate or emergency remedial action for problem resolution.

Not Rated

The dam has not been inspected, is not under state or federal jurisdiction, or has been inspected but, for whatever reason, has not been rated.

Not Available

Dams for which the condition assessment is restricted to approved government users.

Hazard Potential Classification

High

Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.

Significant

Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be in areas with population and significant infrastructure.

Low

Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner’s property.

Undetermined

Dams for which a downstream hazard potential has not been designated or is not provided.

Not Available

Dams for which the downstream hazard potential is restricted to approved government users.

Source: National Inventory of Dams

Generated by MPG